How To Install Fence Post Spikes

Easy fence post installation

There are a number of different sized metallic mail service support spikes bachelor on the market place for different contend heights. Using a metal spike means that you lot can avert excavation a big deep pigsty within which to identify your fence post. Keeping a timber fence postal service out of the soil (in a higher place footing level) as well helps to reduce the likelihood of the post rotting.

The nigh mutual sizes of metallic spike include:

A 600mm (24 inch) fasten – this will support fences upward to one.2m (iv feet) high.
A 750mm (30 inch) spike – this will back up a contend which is ane.8m (half dozen anxiety) high.

In order to drive the spike into position you will need to use a sledgehammer and/or driving tool. Remember to check the ground for underground services before starting. To protect the socket end of the contend support when hammering the spike into the ground, it is a skillful idea to place a piece of wood of a like size to the contend mail in the socket. It is important to make sure that the spike is going into the ground vertically; a spirit level can be used to check this. The spike support is in place once the socket is the only part of it showing above the ground.

In one case the debate mail service has been slotted into the socket, it needs to be secured by screwing through the holes provided on the sides of the socket. Retrieve to make certain that each fence mail is in the correct position to accommodate the space of each of your fence panels; y'all don't want to get it in the wrong identify and have to go along hammering in the spikes again and once more.

For more than information on how to correctly install a fence post, watch our useful video below.